Introduction LoRa & Module RFM95 Hoperf

In this opportunity we will make a brief characterization about LoRa ™ and specifically Radio RFM95/96 manufactured by Hoperf Electronics. Since a couple of months ago, 2 modules arrived, initially I want to make an introduction on the subject that had been pending for a long time. Website: Hoperf Electronics Personally for a long time I…

Meter PZEM-004 + ESP8266 & Platform IoT Cayenne Mydevices

In this opportunity we will integrate our electric consumption or  active power meter , Pzem-004 of  Peacefair  with the IoT Cayenne mydevices platform using an ESP8266 module, later we will create a dashboard to visualize the 4 available variables such as active power, accumulated electric consumption, voltage and current. Previous Tutorials Recommended Introduction IoT Platform Cayenne mydevices…

Tutorial Platform IoT Ubidots & ESP8266 + Sensor DHT11

  This time we have tested the platform Ubidots, is an IoT platform dedicated to the collection and display of data, creating colorful graphics. For our test we will use the Module ESP8266 and a DHT11 sensor to measure the temperature / relative humidity and later visualize it.  Official Website: Ubidots Initially Create an account…

Create Account in IoT Platform Ubidots

We have tested a wide variety of IoT platforms in this opportunity we will create an account on the platform Ubidots, this initiative was born to facilitate the connection of devices applied to the industrial and health. To highlight the large number of available devices (libraries and integrations) to connect with ubidots. Ubidots has 2…

WifiManager + Emoncms (OEM) with ESP8266 (Temperature) #1

The following implementation using an ESP8266 module and a temperature sensor ds18b20 allows the configuration and sending of data to Emoncms without requiring to modify or edit a line of code, facilitating the creation of parameterizable applications. After testing the Wifimanager libraries, which allow an agile configuration of the network credentials and additionally allow to…

Installation IoT Platform Emoncms in lubuntu Linux

We have done a lot of testing on this platform Emoncms part of the OpenEnergyMonitor Project, which has very attractive features if you decide to monitor or control your “bugs” Arduino, RPI, Esp8266 … Although we will emphasize on the platform, it is important to know the main mission of the OpenEnergyMonitor Project. is a tool…

Introduction Plataform InitalState & ESP8266

This time we tested the Initialstate platform, is an IoT platform dedicated to the collection and visualization of data, creating colorful graphics. For our test we will use the ESP8266 Module and a DS18B20 Onewire sensor to collect temperature and then visualize it. Safely send time series data to your account from sensors, devices, software…

ESP8266 & Public MQTT Broker mosquitto.org & Node-RED

In the last tests we have taken the MQTT protocol since it has taken great strength the last few years and we think it is thanks to its simplicity, security, practicality and very lightweight projects IoT and M2M applications. Thanks to the contribution of developers and developers of MQTT applications, there are public MQTT Internet…

ESP8266 & Public Broker MQTT mosca.io & Node-RED

The MQTT protocol has taken great strength in recent years since it is simple, safe, practical and lightweight perfect for IoT and M2M applications. Thanks to the contribution of developers and developers of MQTT applications, there are public MQTT Broker for tests, are available to connect from any MQTT client in this case will use…