Basic Modbus RTU Master RS485 Test with ESP32 + XY-K485 + PZEM-016 (without libraries)

In this opportunity we will carry out tests and explanation of the Modbus RTU protocol implemented in ESP32 requesting data from the Single-phase consumption meter PZEM-016. The intent of this tutorial is: 1. Explain in a simple way the creation and operation of an industrial protocol, in this case the Modbus RTU protocol used and…

Integration http JSON Node-RED (Raspberry Pi) with PowerPDU 4C from Netio # 002

A few ago we made the review of the Netio PowerPDU 4C a Power Socket, it is an Intelligent Socket which allows Iot and M2M integrations in a very easy way. Following the complete review of the Netio PowerPDU 4C, it has a lot of interesting features for measurement and control. In this tutorial we…

Meter PZEM-004 + Arduino Nano Modbus RTU (RS232) & Platform IoT Node-RED

Originally this test is performed in June 2018 in less than one year, for reasons of availability do not publish, technically just missing the documentation, then I will present the results, well they say there is better late than never. In this opportunity our PZEM-004 meter or it is also possible with our PZEM-004T communication…

Initial Review Meter PZEM-016 Modbus RTU RS485 by PeaceFair

In previous tutorials, we conducted tests with the PZEM-004 y PZEM-004T with display, single-phase power consumption meters , which have great potential for basic applications of electrical consumption measurement or active power. For some months I have a new Peacefair PZEM-016 meter which has features and additional improvements which we will see in the following…

Measurement Electrical consumption with Ubidots Industrial & ESP32 + PZEM-004T

On this occasion I have proposed to measure the electricity consumption of my entire house to make comparative estimates with the collection of my energy bill and analyze. On this occasion I will use the IoT platform Ubidots in its Industrial version, previously we had done tests with the educational version, but this industrial version has special…

Meter PZEM-004T with Arduino ESP32 ESP8266 Python & Raspberry Pi

In this opportunity we will collect tests with my new electric consumption meter PZEM-004T, making integrations with some of the most known hardware platforms ESP8266, Arduino Nano, ESP32, Arduino UNO + Shield Ethernet W5100 and Python in Raspberry Pi. For a long time I wanted to try the PZEM-004T of Peacefair, I bought my meter…

Meter PZEM-004 + ESP8266 & Platform IoT Ubidots

In this opportunity we will integrate our active power meter or power consumption, Peacefair Pzem-004 with the IoT Ubidots platform using an ESP8266 module, later we will create a dashboard to visualize the 4 available variables such as active power, accumulated electrical consumption, voltage and current . Update Ubidots Libraries V3.0.0 for ESP8266 modules I…

Comparison Measurements Peacefair Power PZEM 004 VS Chint DDS666 & ESP8266

We have previously performed tests with 2 active power meters. In this case we will visualize the difference of both measures of instantaneous active power. I notice that I do not have a standard meter to take as a reference, I simply want to corroborate that if the calculation made in Arduino IDE with the…

Meter PZEM-004 + ESP8266 & Platform IoT Node-RED & Modbus TCP/IP

In this opportunity we will integrate our active power meter or electric consumption,Pzem-004 – Peacefair with the IoT Node-RED integration platform used in previous tutorials, we will use an ESP8266 module configured as Modbus TCP / IP slave, later we will visualize the measurements in Node- RED Dashboard to visualize the 4 available variables such as…