WifiManager + Emoncms (OEM) with ESP8266 (Temperature) #1

The following implementation using an ESP8266 module and a temperature sensor ds18b20 allows the configuration and sending of data to Emoncms without requiring to modify or edit a line of code, facilitating the creation of parameterizable applications. After testing the Wifimanager libraries, which allow an agile configuration of the network credentials and additionally allow to…

Installation IoT Platform Emoncms in lubuntu Linux

We have done a lot of testing on this platform Emoncms part of the OpenEnergyMonitor Project, which has very attractive features if you decide to monitor or control your “bugs” Arduino, RPI, Esp8266 … Although we will emphasize on the platform, it is important to know the main mission of the OpenEnergyMonitor Project. is a tool…

Introduction library WifiManager

The main disadvantage is to configure the network credentials in a esp8266 without requiring to modify and download the firmware again, I have tested with several methods to dynamically store the SSID and  PASSWORD of a network. In the case of the esp8266 programmed in Arduino IDE for some time I have seen a proposal…

Test Module SD / MicroSD via SPI For Arduino & ESP8266

In this opportunity to test an SD Module and MicroSD with Arduino and ESP8266, in advance thanks to ICStation.com. We will not do a detailed tutorial on introduction to SD since there is already great documentation regarding the subject in intenet, but indicate the applications available for these modules. I introduce the SD module and Micro…

Installation Arduino IDE & Boards ESP8266 in Lubuntu

To avoid losing synergy in our tests in Arduino IDE, this time we will install Arduino IDE in our new operating system lubuntu “linux” and we will configure the boards to program the ESP8266. Installation Arduino IDE, Haste the current version 1.8.3. Installation of Boards libraries and examples for ESP8266. Tutorial Recommended: Full migration to…

Full Migration to Lubuntu Operating System

On this occasion I will comment on my experience in the total migration to a linux system specifically the lubuntu distribution, with this tutorial it is only intended to present simply another different option, allowing us to continue our tests with greater efficiency in open source and IoT applications.   After much meditating on the…

Introduction Plataform InitalState & ESP8266

This time we tested the Initialstate platform, is an IoT platform dedicated to the collection and visualization of data, creating colorful graphics. For our test we will use the ESP8266 Module and a DS18B20 Onewire sensor to collect temperature and then visualize it. Safely send time series data to your account from sensors, devices, software…

ESP8266 & Public MQTT Broker mosquitto.org & Node-RED

In the last tests we have taken the MQTT protocol since it has taken great strength the last few years and we think it is thanks to its simplicity, security, practicality and very lightweight projects IoT and M2M applications. Thanks to the contribution of developers and developers of MQTT applications, there are public MQTT Internet…

ESP8266 & Public Broker MQTT mosca.io & Node-RED

The MQTT protocol has taken great strength in recent years since it is simple, safe, practical and lightweight perfect for IoT and M2M applications. Thanks to the contribution of developers and developers of MQTT applications, there are public MQTT Broker for tests, are available to connect from any MQTT client in this case will use…

FRED front-end Node-RED in the cloud

In previous tutorials we have tested with the Node-RED platform a visual wiring tool or connection of technologies applications devices and gadgets created by IBM much used for the Internet of things and this time we will try it in FRED. In previous tests Node-RED was installed locally in my case a server with Lubuntu…