I have found this module with interesting features, which I am going to test and has as its core the already known ESP32 from Espressif, since we are resuming activities we present the ES32A08 module. The ES32A08 is a versatile and powerful expansion board designed to extend the functionality of the 38-pin ESP32 microcontroller, enabling…
Tag: ESP-IDF
ESP32 & DS18B20 Sensor on ESP-IDF Temperature (OneWire)
In this opportunity we will simply perform tests on a ds18b20 sensor, indicating the library used in ESP-IDF, in future tests we will use other protocols, especially Modbus. Libreria: Simple library for single DS18B20 on ESP32 Materials Sensor DS18B20 (Onewire) + Resistor 4.8K Esp32 Devkit ESP-IDF V4.3 > Buy it here: Module ESP32 ESP-WROOM Mounting Buy…
Review Module ESP32 TTGO T-Display 1.14 “
This time we will test the module ESP32 TTGO T-Display 1.14 Inch , which has a IPS screen ST7789V 1.14 “ a resolution of 135X240 per protocol SPI , this module It has a USB type C for programming. We will carry out 2 tests: Test and configuration in Arduino IDE Test and configuration in…
Review HELTEC Module (WIFI LoRa 32) 915-868Mhz for LoRaWAN #4
I have been collecting information about functional nodes for basic LoRaWAN tests for a while. This time I present the HELTEC LoRa 32 v1 Wifi module, it collects several interesting functions in IoT applications. This node is the integration of an ESP32 and a LoRa Chip SX1276 (868-915Mhz) 0.96 inch Oled screen, usb-serial converter CP2102….
Introduction to mDash platform for administration of IoT Devices
On this occasion I present the platform or an administration service for IoT devices called mDash, belonging to Cesanta, the creators of the IoT Mongoose Os development firmware. mDash allows firmware updates OTA (over-the-air) and remote administration, alerts and notifications, remote device control, file management with devices, all these features are for Espressif’s modules ESP32…
MQTT in ESP32 with ESP-IDF – ESP-MQTT & Node-RED
Normally if we look for tests with the ESP32 module and the MQTT protocol, they mainly use Arduino IDE for ESP32, there is no problem, but this time we will use espressif development environment “ESP-IDF” or “Espressif IoT Development Framework” for the ESP32 which has more advantages and features for more robust applications. ESP32 Module…
ESP-IDF for Modules ESP32 Complete Installation
This time we will install and configure Espressif IoT Development Framework platform (ESP-IDF) from scratch, this is the official espressif development platform for the ESP32 modules. In previous tutorials we talked a little about the ESP32 that have Wi-Fi (2.4 GHz band) and Bluetooth 4.2 in a single module among other features. ESP32 eBox&Widora first review I took…