Arduino + ESP8266 + Software Opto22 example Scada Industrial

  Has made the integration of Arduino + ESP8266  + Software Opto22, implementing its environment scada right through IP and Modbus TCP Modbus RTU, the idea is to implement this hardware in the industry for both monitoring and control. 1- Arduino MEGA 2560 Master Modbus Potenciometer Display  Oled  The Arduino configured as Modbus RTU master sends…

Test Arduino Mega 2560 and ESP8266 (AT Commands)

Introduction This test is performed given the lack of use of serial ports Arduino Mega 2560 and test communication between the Arduino Mega 2560 and ESP8266 module, test has been conducted, data take into account, in this case the ESP8266 has been configured to work with AT command Firmware v0.9.5.2 module 115200 baud rate. Extra…

ESP8266 + Arduino + Oled ( Client IRC Chat Control) Part 1

I have seen many examples of how to control the Arduino remotely but require excessive settings and when using either ethernet LAN or WLAN communication in most examples only works on a local network or intranet. It tryied a simple way to control using the IRC Chat forgotten and implement it in the ESP8266 module….

Modbus RTU Master tests with Arduino via RS232 and PLC Panasonic FPX C14R

  This time I have communicated the Arduino with Panasonic PLC and I checked the Arduino useful in the industrial field direfencia of the previous tutorials I’ve tested both devices communicating via RS – 232. Summary 1. The arduino send via modbus ADC value 0 to Holding Register 0 and the plc into a strategy…

Modbus RTU Master tests with Arduino via RS232 Part 2

In the previous test, performs the communication between Arduino Mega 2560 and a Modbus simulator slave THROUGH the USB port that commonly have our arduino, in this case we will test with an Arduino as Master Modbus but via RS-232 with our PC – simulator modbus slave. Arduino Communication Modbus RTU Master and Slave Simulator Architecture Materials …

Modbus RTU Master Library tests with Arduino Part 1

I start with the following question Arduino can be used in industrial aplicaiones? of course, using a common protocol used in the industry called Modbus Serial RTU in this case configured as Master. MODBUS communication is done by sending the value of A0 (ADC0) 10 modbus records using a potentiometer 100k variation is performed.  …