MQTT in ESP32 with ESP-IDF – ESP-MQTT & Node-RED

Normally if we look for tests with the ESP32 module and the MQTT protocol, they mainly use Arduino IDE for ESP32, there is no problem, but this time we will use espressif development environment “ESP-IDF” or “Espressif IoT Development Framework” for the ESP32 which has more advantages and features for more robust applications. ESP32 Module…

Review Module Wemos TTGO ESP32 + OLED V2.0 + DHT11

I present a TTGO ESP32 module, this device has caught my attention since it is very complete, I ordered one to the Banggood.com online store for testing, the interesting thing is the union of the well known ESP32 module, DHT11 Sensor (Temperature / Relative Humidity ), 0.96 inch white OLED display, charging circuit for Lithium…

Measurement Electrical consumption with Ubidots Industrial & ESP32 + PZEM-004T

On this occasion I have proposed to measure the electricity consumption of my entire house to make comparative estimates with the collection of my energy bill and analyze. On this occasion I will use the IoT platform Ubidots in its Industrial version, previously we had done tests with the educational version, but this industrial version has special…

Meter PZEM-004T with Arduino ESP32 ESP8266 Python & Raspberry Pi

In this opportunity we will collect tests with my new electric consumption meter PZEM-004T, making integrations with some of the most known hardware platforms ESP8266, Arduino Nano, ESP32, Arduino UNO + Shield Ethernet W5100 and Python in Raspberry Pi. For a long time I wanted to try the PZEM-004T of Peacefair, I bought my meter…

Arduino IDE for ESP32 modules

Given the great popularity of the ESP8266 programmed from Arduino IDE in great contribution by Ivan Grokhotkov thanks, Currently for ESP32 modules has been allowed to program them from Arduino IDE in collaboration with espressif, Although it is a project under construction so far the control of certain hardware is in the process of migration. Currently…

ESP-IDF for Modules ESP32 Complete Installation

This time we will install and configure  Espressif IoT Development Framework platform (ESP-IDF) from scratch, this is the official espressif development platform for the ESP32 modules. In previous tutorials we talked a little about the ESP32 that have Wi-Fi (2.4 GHz band) and Bluetooth 4.2 in a single module among other features. ESP32 eBox&Widora first review I took…

ESP32 eBox&Widora first review

More than a year ago Espressif released the long-awaited ESP32, these modules are low cost microcontrollers, low power consumption, Wi-Fi chip, Bluetooth and what is really amazing the Tensilica Xtensa LX6 dual-core microprocessor !!, another interesting fact has improvements in security and secure connections, is the successor of esp8266. Unlike ESP8266 espressif design the ESP32…

Introduction to Lora Server Platform IoT LoRaWAN

Loraserver is a project started in 2015, it is an open source LoRaWAN server, the project provides the components to create LPWAN networks based on LoRaWAN, it includes a user-friendly web interface and the gRPC and REST APIs, each component or module is configurable and they also allow exchange according to the needs of their…

Test

Buy it here: Module ESP32 ESP-WROOM Buy it here: Modulo ESP32 ESP-WROOM Oled 0,96 TTGO Buy it here: Module ESP8266 NodeMCU v3 WIFI 4Mb Buy it here: Module Arduino Nano v3 ATmega328P Buy it here: Module Arduino MEGA 2560 Rev3 ATmega2560 Buy it here: Raspberry Pi 3 Model B or B+ with Case Buy it…

Meter PZEM-004 + Arduino Nano Modbus RTU (RS232) & Platform IoT Node-RED

Originally this test is performed in June 2018 in less than one year, for reasons of availability do not publish, technically just missing the documentation, then I will present the results, well they say there is better late than never. In this opportunity our PZEM-004 meter or it is also possible with our PZEM-004T communication…